UPDATE 10/15: READ IF YOU PLAN TO USE HUB WITH ZHA
The updates for this little device keep coming. Thanks to the folks leaving comments, we keep getting more information. I apologize for not noticing this myself, but I did not spend any time trying Zigbee2Tasmota on this device having played with it enough on the Sonoff hub.
A commenter, Ronald, noted that using Zigbee2Tasmota, attempting to pair Zigbee devices caused the hub to reboot. I confirmed this myself, and tried with both Zigbee firmware packages from the EmberZNet NCP UART EZSP firmware page.
I attempted to build … Read the rest
UPDATE 10/18: READ IF YOU PLAN TO USE HUB WITH Zigbee2Tasmota
So while the documentation in the initial post on how to compile and flash Tasmota to the ZB-GW03 works, there is a bug when using the Tasmotized device with Home Assistant.
After changing the device to a ZHA Bridge, a power disruption will prevent a reconnection to Home Assistant once power is restored. The only way to reconnect appears to be by switching the device template back to Zigbee2Tasmota, letting it start, and then back to the ZHA Bridge template. Afterwards it will reconnect as usual. A … Read the rest
To follow up my last post, integrating a newly flashed Tasmota Zigbee Coordinator with Home Assistant has a third option besides ZHA and Zigbee2MQTT; it can be used directly as a Zigbee Coordinator using its own amazing Tasmota Software.
The device itself uses a zigbee implementation called Zigbee2Tasmota, which is a full-fledged zigbee routing platform with the usual MQTT integration. Unfortunately, it is probably overlooked because its use is limited to the Tasmota console, but it may be an attractive option for some, especially for a potentially more reliable connection when relying on the WiFi radio of the … Read the rest